Premier Customer Portal 
Enquiry Basket The MIG liner is a much more critical part of the MIG process than is generally recognised. The main requirement is low friction but useful life. A lot of feeding issues can be down to the liner needing to be changed as debris can build up and start to intermittently jam the wire. PTFE or graphite/polymer tubes are used for materials like aluminium and MIG brazing wires but not regularly for steel wires as the steel wire wears them out quicker.
44.0350.1806 CMT Neck Liner
£0.00
£0.00
The MIG liner is a much more critical part of the MIG process than is generally recognised. The main requirement is low friction but useful life. A lot of feeding issues can be down to the liner needing to be changed as debris can build up and start to intermittently jam the wire. PTFE or graphite/polymer tubes are used for materials like aluminium and MIG brazing wires but not regularly for steel wires as the steel wire wears them out quicker.
Share
Have a question about this product? Call us now on 01234 345111 or email info@pwpind.com
Additional information
| Product Type | MIG |
|---|---|
| Brand | Fronius |
| Family | Liner |
